we have two Storage location(0010,0070) which assigned to one warehouse (103)
I have done customizing related to create TO immediately for MVT 311 (OMLR transaction, Attached Files), but when I do transfer posting within a plant, Lt06 do not call up immediately.
I think its because of that we transfer material in one warehouse, Am I right?
Hello Experts,
I am working with RF screens , I want to replicate or i just want to update the standard table /SCWM/AQUA ,
Could you please provide any BAPI,s which updates the DB Table /SCWM/AQUA .
Regards
SAM
Hello Genius
In my ECC-EWM system, i came across strange problem. Earlier the inbound delivery successfully transferred between servers but few days back at
the time of inbound delivery transfer i got the Program Error i.e.Syntax error in program /SCWM/SAPLL03A. When i clicked for Program Error message the following information shownN o log was found for these selection criteria Message no. BL018.
I gone through SLG1, SMQ2,SMQ1 but all in vain as i am not able to find the root cause. Kindly help.
For more information, I attached the screen shot of the error.
Thanks
Kumar
Hi
I need help with the following scenario in the Inbound Process.
During unloading of a TU with multiple Inbound Deliveries, the following scenarios have to be mapped.
I have been able to do the first 2 scenarios using RF. But the problem is with the 3rd scenario.
Though it is possible to do it on the Desktop, there is no option in the RFUI to pack multiple inbound deliveries into a single HU.
I haven’t maintained the packaging specification for the material.
Another requirement is to create nested HUs while unloading in RF. Even this can be achieved through Desktop but not RFUI.
The screens I am using in RF is as below. ( RFUI -> Inbound Processes -> Unloading -> Unloading by Transportation Unit -> New HU )
Thanks
Anirudh
Hi Friends,
I have a problem during delivery creation. Inbound delivery is created and distributed successfully from ERP but getting stuck in EWM system with error message " No business partner found for ERP partner SER001 (role:WE)"
I CIF all the vendor from ERP to EWM with selecting option 2 in create loc/BP field. The BP is created successfully in EWM eith ID type = CRM004 in Identification Tab.
But still shown the same problem during creation of delivery. Please help.....
Thanks
Sudip
Hello all
I met problem that a outbound delivery contained a sales bom line item and a line item without sales bom. When the delivery was sent to EWM, I find that in the outbound queue in erp , there is only one line item without bom in it and the sales bom line item disappeared.
Anyone knows about it?
Hi experts,
I wish to integrate an RFID system with EWM. The system is fully configured (all processes from inbound to outbound) to work with a barcode scanner, I need to do the same with RFID tags.
As per my understanding, integrating RFID with SAP EWM requires SAP Auto-ID to also be installed. Is this true, or can it be done without AII?
Any guidance/ direction is appreciated. I have only about a month of exposure in SAP, so the more explicit you are, the greater it is of help to me.
Thanks in advance.
Sabareesh
Zero Stock physical Inventory is working in desktop but not able trigger for RF device
Working with Desktop transaction
Zero stock physical inventory check (Both with and without PI document) is configured in SPRO
WE create Ad-hoc product warehouse task for bin to bin transfer
Zero stock check is activated in the WT (Field “L.StkChk Plnned” = 1 or 2)
Go to confirm the WT
System asks for the zero stock check confirmation
Issue with RF transaction
Configure the queue determination in SPRO to perform zero stock check in RF device
Create ad-hoc product warehouse task for the exactly same scenario as above
The zero stock check is not activated in the WT (Field “L.StkChk Plnned” = Blank)
Please help me with valuable pointers to resolve the issue.
Regards,
Malay
Dear Gurus,
We have the below scenario Pick warehouse task is created from bin A which is supposed to go to Bin B. Instead of going to bin B directly it should always go via Bin C.
So the final path should be A ----C -----B
When I create pick task, system is able to trigger LOSC only when C is pick point because the pick task is a product warehouse task (destination
HU is blank) at the initial creation. System is bringing the entire source HU to pick point and asking us to break and remove partial pick from it at C.
But our requirement is we do not want to move full pallet from the bin A to bin C and instead would move partial pick from bin A directly, move to bin C and then subsequently to bin B.
Please guide with your valuable pointer for how to address the issue.
Regards,
Malay
Hi Tehre,
We have a issue on the bulk storage, we will have a big bulk bin, and due to some history issue, we have and will have multiple batches for the same material, with same date of manufacturing putaway to the same bin.
As it is a 6 deep, 2 wide, 4 hight bin, sometime we will have a issue for forklift driver to move out the pallets on the front to get the one on the end, it is a waste and lack of efficiency .
Is there any solution to know the position or sequence of each pallet in the bulk bin which can be used to determine which pallet is the right one to pick?
Hi EWM Gurus ,
Inbound with VAS
Process flow
1) Unloading
2) Quality Inspection
3) VAS Workcenter
4) Splitting of put away task to forward pick area and reserve locations
5) Palletization
6) Put away to final bin
Is it possible to create VAS order for each HU received in the inbound delivery ?
Scenario - An inbound delivery having multiple HU of the same material can go to different packing table . So as you can see as there is a need to maintain multiple work center for the same VAS order . We have around 50 packing tables in the inbound process and the operator can choose to put it in any of these packing tables. So in order to achieve this
i) Each packing table is considered as work center
ii) For the storage type linked to the VAS work centers i have maintained WT generic as 2 so that it proposes only the storage type and not the work center (storage bin).
iii) In POSC for the VAS external step, only storage type is maintained since the work center is selected by the operator.
So the VAS order is created without a work center assignment . Whenever the the operator selects the bin , VAS work center is updated in the VAS order.
But if multiple HU's are available for the same inbound delivery line item it will go to multiple packing tables (work centers). So is there a way to achieve this scenario or Is it possible to create VAS order for each HU received in the inbound delivery ?
Regards,
Venky
Hi.
I'm currently trying to configure quality management in EWM 9.1 and I'd like to understand what's the meaning and use of QScore while defining decision codes under results in Quality Management in IMG.
Can it be used to rate vendors and be used to trigger skip lots?
Looking forward to the discussion.
Thank you.
Dear Gurus,
We are using scrapping process (Mv type 551 or 555) initiated in ECC.
Standard delivery trype DOG is mapped to both the movement types.
Our requirement is that for the same delivery document type DOG, we should be able to determine seprate EWM document types through Code for Initiator of a Communication Chain "SCR" and " " (Blank). Note: Document type DOG is also mapped to many other ECC movement types.
Issue
Unable to get how system would populate Code for Initiator of a Communication Chain "SCR" for ECC delivery for deliveries created from movement types 551 and 555.
Please reply with your valuable pointers.
Regards,
Malay
Hello Experts,
I know we can post auxiliary components in VAS work center which will post Movement type 291 in ECC.My question is ,is it possible to post consumption against a cost center? Where can we assign cost center? in work center? packaging specification?
Hi All,
I have created an Inbound delivery in ECC against a purchase order through VL31N.
Delivery sent to WMS system but not visible .
SMQ1 does not contain any outbound queue related to my delivery in ECC.
SMQ2 does not contain any Inbound delivery related to my queue in EWM.
I found my queues in SMQ2 in ECC system(i am still wondering why?)
In error log i see "System Fail" with status text Function module "" not found.
Please help me to resolve the same.
Thank you
VIJAY
Hi EWM Gurus,
Scenario - Inbound with VAS
Is it possible to create a picking task for the packaging materials used for a VAS order (Inbound) . I am aware of that fact that consumption of packaging materials is possible .
I have tried to use KTS so that a BOM can be maintained in ECC so whenever i create to KTS order it will create the task for the packaging materials. But in our scenario the input and output materials are the same . So tried to maintain a recursive BOM in ECC and created the KTS VAS order for the material. Since EWM does not support recursive BOM, so no VAS order can be created.
Regards,
Venky
Hi All,
We are implementing Dock appointment scheduling and there is a requirement to have the recurring appointment in Dock appointment scheduling.
Please suggest how to do the recurring appointment with the same time slots and other details like carrier, means of transport, loading point etc..
For example if we have created the appointment for today for time slot 7AM to 8 AM for specific carrier then system will automatically create the next appointment for tomorrow with same details.
Thanks and regards
TD
Hello Experts,
I have gone across WT and WO definition.
I know that we can create one WO for one or several WT as per defined parameters.
But i have below concerns for WT and WO :
1. Do we have to create WO for every WT irrespective of process.
Suppose during GR process i have to follow activities like Unloading,Packing and Putaway.
Here i create WT for all steps,So do i have to create WO for Unloading,Packing and Putaway ?
2. Can we skip WO for some WT ?
Regards,
Hi Experts,
When inbound delivery created and i am not able to pass to EWM, in ECC System where i need to check error log in SMQ2 or SMQ1. please explain.
Thanks
Venu
Hi,
I have created a work order through IW31. For one component, reservation is created. When I go to VL10H to create outbound delivery, I am unable to find any entry to create the outbound delivery. I have added the ship-to-party and sold-to-party in the partner tab. but unable to create outbound delivery through VL10H.
Please suggest if I miss anything in the work order because of which no entry is visible in VL10H.
Thanks
SBS