Hi all,
I am facing the issue while posting the ADHOC PI document. i didnt define any tolerances group for posting difference to my warehouse,even though i am facing the issue.
Kindly advice, how to solve this.
Thanks
balu
↧
Item 000001 cannot be posted due to exceeded tolerances
↧
Kit to stock issue
Hi All ,
I am working on kit to stock initiated from VAS Order in EWM System . i am able to create VAS Order but when i save it , it throws a runtime eroor "Assertion failed" .
Not able to resolve the issue, please help.
Thanks
Tapan
↧
↧
Table for Inbound Delivery Doc link with Quality Inspection Doc
Hi All,
I am working on a SE38 report where I need to link Quality Inspection document with Inbound Delivery Doc. Nr.
/SCDL/PROCH_I, /SCDL/PROCI_I, QIE_INSP_DOC are not helpful. Kindly suggest some solutions.
Regards,
Satadru.
↧
FM to delete Final Delivery?
What is the FM or BAPI or Class-method to delete Outbound delivery?
Below are the screen shots of manual process.
6087, 6088, 6089 and 6090 are the Outbound deliveries.
Now go to /SCWM/PRDO T-Code. and Copy the Document no. from TU screen. (679, 680, 781, 782)
Click on the advanced search and paste those in outbound delivery order fields.
Click on Advanced Search.
Now select all the records click on the outbound delivery.
Here are the outbound deliveries.
Now click on the delete button and save it.
I have tried with FM /SCWM/DLV_DELETE_WHR_PAR. It is not working.
↧
Change storage type of a storage bin
Hi,
I need to know if it is possible to change the storage type of a storage bin or it is neccesary to create the new storage bin in the correct storage type (LS01N) and then delete the old one (LS02N).
Thanks for your help!!
↧
↧
WT creation error when releasing Wave:Source bin not found
Dear all,
Even though I created stock and configuration is at place I am facing WT creation issue.Please let me know if you have any inputs on this.
thanks
Prashant
| Type | Message text | Long text |
| ***** Start wave release for wave YU41 80 | ||
| ***** Wave release division step started for wave YU41 80 | ||
| Error during WT creation for wave item YU41 80 1 | ||
| ***** Product WT Creation ***** | ||
| For wave 80 1 | ||
| For warehouse request SPC 9018 10 | ||
| For product 2LA456207-00:88308; quantity 1.00000000000000 EA | ||
| ***** Determine source data - start ***** | ||
| Determining source data with storage type:, section:, bin:, HU: | ||
| Storage type search fully defined: No entry found | ||
| Storage type search with wild card: Search sequence STRF and rule FEFO found | ||
| Determine stock in source storage type OVFL | ||
| Determine stock in source storage type STRF | ||
| Available quantity in bin is zero | ||
| Available quantity in bin is zero | ||
| Available quantity in bin is zero | ||
| System could not determine source storage bin | ||
| No warehouse task created | ||
| Error during WT creation for wave item YU41 80 2 | ||
| ***** Product WT Creation ***** | ||
| For wave 80 2 | ||
| For warehouse request SPC 9019 10 | ||
| For product 1152778-2:88308; quantity 1.00000000000000 EA | ||
| ***** Determine source data - start ***** | ||
| Determining source data with storage type:, section:, bin:, HU: | ||
| Storage type search fully defined: No entry found | ||
| Storage type search with wild card: Search sequence STRF and rule FEFO found | ||
| Determine stock in source storage type OVFL | ||
| Determine stock in source storage type STRF | ||
| Available quantity in bin is zero | ||
| System could not determine source storage bin | ||
| No warehouse task created | ||
| No warehouse tasks were created for wave YU41 80 |
↧
Outbound delivery replication
Hi Experts,
I made settings for production integration with EWM system and created production order and staged it.
It created an outbound delivery at ECC side and the same is distributed to EWM but got struck in queues.
I am expecting the posting changes document to be created for this case. Which is not crated and showing
below messages in queues. "Could not create header data delivery XXXXXXX, system XXXX" Message no. /SCWM/ERPINTEGRATION012
Warning messages: No date/time type found for ERP date/time WSHDRKODAT /SCWM/ERPINTEGRATION 5
Please suggest me in this issue what interfacing i could be missing.
Thank you...
Srini
↧
Help with a table Join
I am looking to create a table containing the two data elements listed below.
/SCWM/SLED
&
/SAPAPO/MATNR
I have been unsuccessful so far. I thought I would post here in hopes of someone being able to offer a quick fix in lieu of me spending too much time on this.
Thanks in Advance!
↧
To indicate the reason for the WM physical inventory difference
Dear all,
I need to specify the reason for the WM physical inventory difference as we can do on MM - MI07
There is a way to indicate the reason for the WM physical inventory difference on LI11N or LI20?
Cheers
↧
↧
How to trigger movement 301 (Plant to Plant) automatically during putaway in EWM
Hi Friends,
How are you doing?
I need a help and advice in EWM to achieve below requirement from client.
Business Requirement –
We have a scenario where 2 plants (PL1& PL2) assigned to one EWM warehouse WH1 . Finished goods are to be received in PL1 /ROD in the warehouse WH1 and after putaway it should be automatically transferred to PL2/AFS in WH1
by triggering 301 (plant to plant) in ECC.
Configuration done–
Configuration made for availability group / stock type / Party Entl to Dispose.
WH1 -> PL1/ ROD assigned to Availability Group –> ROD –> stock type F1 –> Party Entl (PL1)
WH1-> PL2 /AFS assigned to Availability Group –> AFS –> stock type F2 -> Party Entl (PL2)
WH1 will have 2 party Entitled to Dispose PL1 and PL2. No Default Part Entl is set for WH1.
Final Putaway storage type is assigned Availability Group AFS and mandatory flag is set.
Expected result –
As per above set-up, system is expected to change stock type from F1 to F2 during putaway (as AFS is mandatory in final putaway bin) and in
the background party entitled to dispose for the stock should be changed from PL1 (F1)to PL2 (F2) and should trigger 301 (Plant to Plant) movement in ECC.
Issue –
The Stock was received in WH1 in stock type F1 and Party Entitled PL1 in GR-ZONE. But during putaway task creation system showing error as
below
Could not determine ERP stock data for: WH1- Party Entl -PL1 - F2
Message No. /SCWM/ERPINTEGRATION105
Diagnosis
The transaction you executed causes a stock posting in the ERP system. For this, the system must determine the stock data for the ERP system (such as material, plant, storage location) from the EWM data (such as material, party entitled to dispose, stock type).For the following field, the system could not determine any ERP data: WH1 PL1 F2
Unfortunately, system is not changing the party Entitled to dispose from PL1 to PL2 when it is set to change stock type from F1 to F2 during putaway / bin to bin movement.
I tried to do posting change manually in /SCWM/POST and changed stock type from F1 to F2 and party Entl from PL1 to PL2. This triggered 301 movement in ECC and stock is moved from PL1 to PL2.But Stock movement/ putaway task creation is not allowing to do so.
Can above requirement be achieved in EWM to automatically change the party Entl to dispose / plant when the stock type / Availability group is changed during putaway/ stock movement? Is there any config missing or enhancement is required to be done?
Please help.
Thanks and regards,
Virendra Mokashi
↧
Creating TU - interface to ERP
Hi experts,
maybe an easy question:
I created an TU (/n/scwm/tu), with the name UK_12 (truck going out on 12).
Now this is interfaced via iDoc to ERP
-> now I have a problem saying transport number UK_12 is not in my external number range.
Fine, I can fix this by saying my external number range allows this name,
Next day I have the same TU - UK_12 (as the truck leaves every day on 12).
This can't work as I already have a transport in ERP system with this "number".
How to handle this?
Regards
Michael
↧
PI - send difference to a different bin
Hi all,
I created a Physical Inventory for a specific bin that has one HU with 100 KG. Lets say that I found only 5 KG and registered the count. When i post the difference in the transaction /SCWM/PI_PROCESS, the system updates EWM and removes 5 KG from the bin.
Instead of removing the quantity, is there any possibility to transfer this quantity to another bin like 999 PI document?
Thank you in advance.
↧
EWM 9.3 GA (general available)?
Hello,
Please let me know if EWM 9.3 is GA now?
Regards,
Chandra
↧
↧
How to handle other movement types in EWM
Hi,
Is there a way to handle 103 and 105 movement types in EWM instead of 101?
Karthik
↧
'Query' method of class '/SCWM/CL_DLV_MANAGEMENT_PRD'
Hello Experts,
We have a report which will give us all Outbound delivery which are 'Packed'.i.e. DPC status is '9'
Also we have refresh button in Report so that if any delivery gets packed it will be updated in List after pressing refresh.
Im using 'Query' method of class '/SCWM/CL_DLV_MANAGEMENT_PRD' to get the Outbound delivery status.
Lets take example
When I run the report It gives me '5' deliveries which are packed.Now I open new window and Packs new delivery.
So when I press refresh button it should update the list with new delivery but this is not happening.
I further analyzed and I found that the packing status of delivery which is newly packed is still '1'(I.e. DPC is '1'). This status returned by the 'Query' Method of '/SCWM/CL_DLV_MANAGEMENT_PRD'.
And Also when I come back from the report and re-run again it is updating the list with '6' deliveries,as Packing status returened by Method is '9' for that delivery.
So what parameter needs to send to method so that it will fetch updated Packing status.
please help to solve this issue.
↧
Different Stock type to be put in seperate bins
Hello Experts,
I am working on a scenario where I want system to separate different types of stock type in different bins during putaway.
I have stock type F1 (availability group 001 for ROD),F2 (availability group 002 for AFS)
and M1 (availability group 001 for ROD) and M2 (availability group 002 for AFS).I want to maintain both M2 and F2 in same storage type but in different bins.
But from what I see one storage type is assigned to one availability group and thus can have only one stock type in it. Can anyone suggest me how can I achieve it?
One option I see is if I don't maintain any availability group in storage type and then change the stock type in inbound delivery to the one I want to. But I still haven't putaway it in my bin,if I change stock type in inbound delivery to F2/M2 its not correct.Is it possible to change stock type once I place stock in final bin ?
Regards,
Khushboo
↧
Create a mixed storage bin
Hello,
I need to know if it is possible to create a mixed storage bin in a storage type tha does not allow to have mixed storage.
Thanks!
↧
↧
Can i create multiple stock types linked with one availability group?
Hello Experts,
I have a requirement where I want to create 3-4 different stock types which should all belong to same availability group which in turn is linked to only one storage location.So far i have not found this achievable.Is that possible technically in EWM ?
Regards,
Khushboo
↧
Enhancing Putaway strategy in EWM
Hello experts,
I have this requirement to add one more parameter country of origin in putaway search strategy.Can someone guide me on how we can achieve that?
Any help will be highly appreciated.
Regards,
Khushboo
↧
Warehouse management configuartion
Dear All,
Can anyone provide the complete configuration document for warehouse management with the functionality of the fields which are important.
Thank you...
↧