Hi Experts,
We have an RF screen developed to enter remaining quantity in any storage bin during ZERO STOCK CHECK. Some times user instead of entering quantity manually he scans the Warehouse task barcode in that field. because of this Invalid values are being stored as available stock in bin.
Is there any way to disable Scanning of bar code into a particular field in RFUI screen?
Thanks,
Aswath.
Hi,
I am getting error while link between packaging material TU and means of transport.
relevant configuration is maintained properly. any one come across with this situation.
swift response is much appreciate.
Regards
Sastry
Hi,
I have created inbound delivery in SCM system successfully and it is replicated to ECC system there i got the following error.
Can any one tell me how to solve the problem step by stem because i am new to sap.
1) Deficit of SL Unrestricted-use 5 PC : LBGDG06201 ANP1 AFS1
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 5 PC. System Response If the message is an error message (E), the above is not allowed. If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message,
check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
2)
My Plant is: ANP1
Storage loc: AFS1 ( available for sale)
Thanks for your kind support.\
Regards.
VIJAY
Dear all,
Someone know a bin report by Storage section? So, the selection parameter is the Storage section.
Someone know a bin report by batch number? So, the selection parameter is the batch number.
I am in WM not in EWM. I do not find WM forum on SCN.
Cheers
Hello Experts,
I think i have configured all the required settings for slotting , but when i execute(/SCWM/SLOT) it , only showing Putaway/Stock removal indicator.
Not showing planned storage section indicator and storage bin types for some reason which i couldn't find it. Please suggest me on this what i am missing.
Thank you in advance.
Srini
Dear Experts,
I'm trying to count my inventory document and the system show the message: Unit of measure UN is not stock-specific.
But I have checked the material and there is the unit UN updated.
In my case the basic unit is M2 and the prefer unit is UN.
Somebody know what can be in this situation.
Regards,
Alan Mattos
Hello,
Will the standard WM run on S/4 HANA? I know EWM will, just need to know if my customer will have a choice once they transition to S/4 HANA.
Thanks,
Chase Burns
SAP Chief Customer Office
Hi gurus,
I am configuring kit to order scenario
with VAS Order.
I have created Sales Order (bom is exploded) , Delivery is created for sales order and replicated to EWM System. ODO is created.But automatic VAS Order is not created. But i am able to create VAS Order manually. when i try to create warehouse task ,it is not possible as there is no HU.i have checked logs it shows
" quantity role profile for item type ODLV
invalid " .Please suggest me how to resolve the issue.
.Thanks
Tapan
Thanks
Tapan Das
Hi All,
I am trying to create a VAS KTS without BOM& start in EWM. I do this using /scwm/vas_kts and mention components & quantity manually.
Kit Header (no BOM) : ZZ-KIT-HDR
Manual component: ZZ-KIT-COMP
Now, I have packspec like below structure of levels:
> Content: ZZ-KIT-HDR
> Level 1: Level Type = any Non KIT level
a) Step 1: Apply label (Element type LABL, HU relevance = ' ' not-relevant for HU)
b) Step 2: Pack in small box ZZ-SMALL-BOX (Element type PACK, HU relevance = 1 Main Packaging Material)
> Level 2: Level Type = KITS (KITS relevant)
- No element group, just some text for kitting. Also maintained External Step correctly
> Level 3: Level Type = MAIN, HU creation = yes
- Pack 5 in big box ZZ-BIG-BOX (Element type PACK, HU relevance = 1 Main Packaging Material)
Now, I can create VAS KTS without BOM successfully.
However when I open the vas order, I get a runtime error OBJECTS_OBJREF_NOT_ASSIGNED. This happens every time when I have any PACK type material in level before KITS level. That is, if I change level 1 and set ZZ-SMALL-BOX as Auxiliary Pack material in element group, it works fine.
If I use the packspec structure as above: Activites in VAS order are shown as (in sequence):
1) ZZ-SMALL-BOX 1 ea (Item = ZZ-KIT-COMP, Aux Product ZZ-SMALL-BOX)
2) ZZ-SMALL-BOX 1 ea (Item = ZZ-SMALL-BOX, no Aux, KITTING activity)
3) ZZ-BIG-BOX 1 ea (Item = ZZ-SMALL-BOX, Aux = ZZ-BIG-BOX)
My question is:
A) Is the above packspec structure correct? If no, why can't we have MAIN packaging material before KITS level? Any reason behind this?
B) The activities described above also seem incorrect, is this right? Shouldn't main ZZ-KIT-HDR should be listed on sequence 2 (kitting)?
Any help or pointers here will be greatly appreciated.
Thanks,
Neetu
Hi all, I wold like to know if is possible to influence the storage strategy (goods receipt process) with the packing information, more precisely with packing material information. Is it possible to change the storage type and BIN determination with this information?
Regards,
Leandro C.
Dear experts,
I have very strange situation in the EWM 9.2 in one of the storage bins...due to storage monitor i got an HU in few bins:
But they are empty.....when I check the table /LIME/NTREE...I see two very streng data lines with the object type 'G':
When I check the data object in SE11, there no values for 'G':
The problem is about that I can't even delete the storage bins, because due to the some tables they are not empty....but they are no stock (aqua table) and no HUs....
Have someone had the situation like this?
BR
Denis
Hi Experts,
I am following simple complex put away with hu that is POSC ( IB01 - IB03) with Process type 1011. Created unloading warehouse task successfully.
if we confirm the open task then only the waiting task will be open.
now, i am trying to confirm the open warehouse task in background or foreground the following errors is coming.
Screen shot for your refer.....
So please advise if any settings has missing............if there how to do that.
Please note that there are two line items and two hu's
Thanks
VIJAY
Hello Experts,
i need to execute a goods receipt for a hu of an inbound delivery.
This can be done via transaction /scwm/prdi:
I need to do this via abap-code and a HU-Ident and the delivery number are provided.
Does anyone know how to implement this and what classes / function modules need to be used? I already have read SAP-Note 1414179 about delivery service providers, but i do not find a way for a hu-goods-receipt.
Thanks in advance,
Matthias
Hi Experts,
Need your immediate supports on this issue which we are facing more than 2 weeks.
Outbound delivery PGI from EWM has not created any reference outbound delivery document in ECC. I can see material movement document created in ECC without any reference to delivery.
Really appreciate your valuable comments on this issue to fix.
Thanks .
Hi All,
I have requirement to fetch package material, total weight etc for outbound delivery.
I am using tcode /n/scwn/prdo. In item level under tab HU there is details like handling unit, pack material etc.
that i want to populate in my smart-form.
I already have information like TU number ,Document id .How do i use this information for fetching Handling Unit.
I tried to use /SCWM/HUREF but this is not relevant to me.
Kindly help here .
Thanks,
Rama Trivedi
Dear all,
Greetings..
In EWM system SMQ1 one queue got stuck with the following error.
The associated outbound delivery for the queue, goods issue completed but queue got failed
Please find the attachment of error screen shots.
Requesting you suggest us how to clear this queue from SMQ1.
Regards
Divakar
Hello experts,
I am working on VAS Order process. While trying to activate ODM for VAS in IMG-->SCWM-->EWM-->Cross Process Settings-->VAS-->Activate Order Document Management for VAS, I am getting below error-
"Component
VASP
The structure of component VASP could not be generated (DDIF_TABL_ACTIVATE)
Order Data Area
Order component VASP specified (status active: 'X') does not exist"
When I go to SCM Basis-->Order document Management-->Check settings in Order Document Management I get additional information about error-
"The component is inactive
Component VASP contains change mode (OBJCHG)
Structure /SCWM/S_VAS_ODM_AUX does not contain all administration fields
Table type /SCWM/TT_VAS_ODM_AUX uses structure /SCWM/S_VAS_ODM_AUX"
Any pointers will be appreciated.
Kind Regards,
Khushboo
When I go the Tcode /SCWM/ACTLOG in ewm it only allows me to change the subobjects of object "/SCWM/WME" in only one warehouse.
How to selectively activate or deactivate application log for a different warehouse.
How to selectively activate or deactivate application log for subojects of different object for example "QIE".
Any pointer will be highly appreciated.
Regards,
Malay
Early Knowledge Transfer workshops are designed for consultants and other persons who are actively participating in the Ramp-Up phase of a new SAP product. Your application for enrollment request is given first priority if you are:
To apply for a particular workshop, use the link provided. If your application for enrollment is accepted, you will receive confirmation by fax or e-mail.
Important Note: Since capacity is limited, an enrollment request must receive confirmation before it can be considered as a final booking!
Hello Experts,
I made all the set ups but when I run Check of ERP-EWM Configuration
RFC destination is missing for logical system XXXXX (ERP System)
When I create OD below error is displayed and I made all set up related to Supply chain unit and rest
Could not determine a supply chain unit for ERP warehouse number WME
Help is appreciated.