Dear experts,
I've created and activated the PI Document:
When I do counting and put the new amount into the position of the PI_Doc it looks good:
And then when I try to save my changes I always get following error:
Off course the posting of the changes cannot be performed in this case...
Had someone simular issue by performing of the Ad-hoc PI?
Which parameter has to be transferred?
BR
Denis
I am processing my wave as a warehouse manager, which may contain over 100 items. How do I know that the 100 items are completed (Picked, Packed and at the door). I looked into the warehouse moniter, under wave (good issue, all three nodes) and none of them seem to give me information as to if my wave is completed.
It appears the wave number is entered in the work order task header for the task that were created for the wave, the wave number does not follow through to all new task to completion of the process. Thus when I use warehouse monitor it does not pull up all of the task associated with the ODO, but only pulls the limited task that were release with the creation of the task via /scwm/wave.
The question I am trying to answer is, How do I know when my WAVE is ready to be shipped?
Hi All
Is there any way to reverse/cancel the GR document posted for an inbound delivery which is already closed by warehouse task confirmation.
Thank you in advance.
Hi All,
I am sending Inbound delivery from ECC to EWM. In that, I am also sending the Over and Under delivery tolerances (percentage) at the line item level. When I try to increase the quantity of the IBD line item, system is considering the tolerance limits and giving an appropriate warning message.
My Question is: When I am trying to do the same receipt on RF and enter a quantity more than the over delivery tolerance limit, the following system behavior is noted
1) When I am entering an over delivery quantity in the 'New HU' section, system is giving an error that delivery qty is exceeded. It is not considering the tolerance limit at all.
2) Lets say we go past the new HU creation screen by entering the exact quantity, then in the next screen I get the option to 'ChgQty' of the HU. There system is letting me change it to any quantity and is not checking the tolerances.
So why is there I difference in function on desktop Vs RF? Is this the standard behavior?
Thanks
James
Hello,
In order to change the layout of an existing screen ( delete some fields, add others), I copied the screen into a new one and I performed the customising tasks.
Now the new screen is displayed correctly, the problem I have is that the fields I added where not populated with the data, despite the fact that I did the necessary Binding and in the debugging inside my pbo I can see that data source contains the value needed to be displayed.
Did I miss something?
Thanks for the help.
Hi,
We have developed one customized view in the material master in ECC 6.0. In that view, there is one customized field whose value needs to be transferred to EWM system using CIF (Core Interface). From the functional point of view, do we have to make any configuration for the interface for that customized field? Please suggest the configuration steps so that the customized field value should be transfered to EWM.
Thanks
SBS
We are looking at analyzing and if possible optimizing the following:
- Carton to order ration
- Cycle times (Order start to complete)
- Cadence / Flow (demand vs flow of work)
- Staffing (Building a staffing model around demand)
What are some of the reports/queries that are available in SAP EWM to retrieve data regarding this for further analysis?
Thanks in advance for all your responses.
Hi Guys,
I configured Slotting process in my system to update Putaway and Picking indicators in Product Master and when I run slotting in background, apart from updating Putaway and Picking Indicators, system is updating Planned Putaway and Picking indicators also. The save option, I used is "Save and Activate Results."
Is there any way, I configure system, so that Planned Putaway and Picking indicators doesn't get updated and only Putaway and Picking indicators gets updated in Product Master?
Thanks in advance.
Pavan
Hi All ,
I need to run scenario in sap-ewm mfs in development server.Please suggest me some plc simulator for it .
Thanks in Advance.
Sohan
Hi,
I am transferring material master data from ECC system to EWM using Core Interface (CIF). I have created an Integration Model (IM) in CFM1. I have activated the IM in CFM2 transaction. Is there any transaction available to check the log of this data transfer? I want to see what are the field values actually transferred from ECC system to EWM system so that I can verify those data in EWM system.
Please suggest.
Thanks
SBS
Hi Friends,
During outbound process in EWM, my completed EWM delivery gets stuck in SMQ1 with error "The ABAP/4 Open SQL array insert results in duplic". I performed following checks and found all the ok. Please help me with your insights.
- Checked the Master data Products, Business Partners,are CIFed properly. Yes they are done properly.
- Checked if inbound is stuck in same way. But its not.
- Checked if there is any enhancement stopping in ECC. There is some enhancement in Document_save in ECC outbound delivery which I got it commented. Still the problem is same.
Please suggest what could be the root cause.
Thanks
Trivedi
Dear Guru's,
I made a Posting change in the eWM warehouse and after saving, a warehouse material document is created.
In which transaction i can see the details in eWM System with reference to that warehouse material document.
please advice.
Thanks
Prabhu.
Hello,
i am new in the page and hope you help me.
Briefly about the problem:
Recently we have inactive storage location (2171), which is not used.
Often our users make mistakes and habit they publish to it.
With the result that the HU's stuck between EWM and 2171.
How i can reverse it ?
Hello
In our business we change the incoterms even after picking and packing of items. The field is not open in outbound delivery order to change. I have tried to add warehouse activity status started and unchecked the field display in the field control profile scdl/out_prd_standard and tried even the same for system profile for the incoterm field but this has not resulted in making the field editable even as soon as ODO is created.
I cant understand why does the system not open this field, what am I missing?
Any clues.
Regards,
Amit
Hello Gurus,
As soon as the ODO gets created in EWM side , i need to create warehouse order as well automatically.
I tried with PPFs and condition records to get this, not working. Please help me in this.
Thank you...
Sridhar
Dear experts,
in the following situation i want to execute a stock removal and the following problem appears:
When the warehouse task for stock removal will be created, the layout-oriented storage process control creates two warehouse tasks:
The first warehouse task is MFS relevant and will be automatically confirmed by the resource (Telegramtraffic).
The second warehouse task (not MFS relevant) stays in status "b" and can´t be activated. But it has to be confirmed manuelly by the user and because of status "b" it´s not possible for the user to confirm the warehouse task.
Why will the second warehouse task not be activated? Do someone know any hints to clear this situation?
Thanks in advance.
Best regards,
Rodrigo
Hi....
Goods issue reversal in transaction /N/SCWM/PRDO
While reversing Outbound delivery 2000104205 error message prompted.
Message no. /SCWM/GOODS_MOVEMENT040
Since mass goods issue is done, system is prompted to reverse all delivery documents
Requirement : Instead of doing goods issue reversal for other documents, we have to reverse only document 2000103954 & 2000104205
Please suggest if there is any steps to solve this.
Is there any validation to restrict mass goods issue in transaction /N/SCWM/PRDO
Regards
Shamal
Dear Experts,
I'm trying to test the PPF in order to create a putaway WT for an inbound delivery in EWM-System directly after its distribution from the ERP-System.
1. I’ve chosen the action profile (PDI_01) and did an assignment to the doc type PDI
2. I’ve created the determination procedure to the action profile:
3. I’ve created a condition records:
After this I try to disribute an inbound delivery from ERP to EWM, but as after distribution as after saving of the inboun delivery nothing happens.
Could you, guys, give some hits, what I missed and where I should define the whrehouse process type for the putaway WT?
Thank you in advance
BR
Denis
Hello Gurus.
I'm looking for a list of the source fields in ECC that are used to create EWM products through the CIF. Can anyone point me to that? I want to profile that data before CIFing to EWM. As an example, I have noticed that some fields are in multiple table such as Volume (MARA / VOLUM) and (MARM / VOLUM). I would like to know which tables / fields are used as the source data for the CIF. Any help is greatly appreciated.
Thanks, Chris
Hello,
My client needs to know whether there are plans to have Shipping cockpit in nwbc bi-directional - for inbound as well - in next release/on roadmap.
Thank you,
Petr