hai,
i want to learn outbound process in sap wm
↧
outbound process in sap wm
↧
Missing transactions in SAP EWM
Hi,
We have recently procured a new system with the follwoing SAP components:
1. SAP ECC 6.0 including Enhancement Package EhP6
2. SAP EWM 7.0 Add-on component including Enhancement Package EhP2
Now, during the configuration we are not being able to run a few transactions.
For example, /n/sapapo/mvm ; /n/sapapo/om17 ; /n/sapapo/vercreate.
Everytime we get a message that says:
Transaction “******” does not exist
Message no. S#343
I also checked for the TCodes in table TSTC, but I could not locate those there .
Someone please suggest some solution to the above mentioned problems .
Regards,
Oritra
↧
↧
ECC to EWM connection issue in IDES
Hi,
I am facing an ECC to EWM connection issue in IDES environment wherein both Inbound delivery and outbound delivery documents from ECC are not reaching to EWM. From ECC, the message shows these delivery documents are distributed to EWM but in EWM, in SMQ2 t.code, an error message “The running application consciously caused an abort with short dump” is displayed.
From ST22 dump analysis, it shows an error message “Support package level not sufficient. See note 1600482”. I also referred this note. It is recommending to install a support package. It is pointing to the patch SAPKNA7026 . In IDES environment, it seems that we cannot install patches. Can you please help me how to fix this issue ?.
I am also attaching detailed ST22 dump. Please help.
Regards,
Sat
↧
Error while posting scrap
Dear All ,
Greetings for day
Kindly guide me below error while scrapping.
Thanks
Jinoy
↧
EWM Packaging Specification Query
Hi Friends
I need your help to clear my understanding about the Packaging specification
From help I know , in this master data we can define the packaging requirements of a product (single level or nested) and further this data can called in different processes using condition technique. While looking into the system , I can see different condition types availble for Inbound , palletization and outbound , warehouse task
I created a single level specification where I specified 100 EA of a product will be packed in a packaging material. I defined OPAL, OIBD and OWHT condition record in the packaging specification with Supply unit and product details.
Now if I create an ID of 130 EA.
Will system create two HUs (100 EA and 30 EA) during the packing function ( Manual Packing) or it will create two WT at the time of final putaway ?
Also I am not clear why there are different condition type for different processes ? I can use the same condition for palletization and inbound process but not sure why different conditions are provided here , I would appreciate if you can help me to understand this..
Thanks for your help
Mahima
↧
↧
How to set default number of copies of labels to be printed in SAP EWM
hi folks,
we have configured in such a way that, whenever we maintain the inbound delivery in /scwm/prdi, GR will happen automatically and a GR label will be printed automatically. We have defined condition records to determine the printer and also mentioned the number of copies as 1. Now, we need to have 2 copies of the GR label to be printed automatically. I've changed the no of copies as 2 in the condition records but still only 1 copy is getting printed. i have also maintained spool parameter where in i have specified no of copies as 2. Are there any other places i need to change the no of copies to be printed? if so, could you please sugget me?
thanks in advance,
best regards,
Praveen
↧
Mobility in EWM
Looking for input on best solution to provide mobile capabilities in EWM environment.
↧
Pick HU RF transaction issue
Dear Experts,
During Picking using RFUI transaction, I want to pick Box HU into Pick-HU. I tried the following setting:
1. Level of Avail. Qty = Highest HU level:
Pick HU verification field not displayed on the screen when picking entire HU
2. Level of Avail. Qty = storage bin level
Source HU is not proposed(since the system does not recognize HU stock on bin)
What configurations are required to make the transaction normal: in which I want to pick whole HU into pick-HU.
HU ctrl is set to: Adopt Source HU with Lower-Level HUs into Pick-HU
Best and Thanks,
Eddie
↧
Single WO create for per bin when pick
Hi,
I have a question,how to actualize one WO per bin when create picking WO,at limit configuration(spro),I don't find config about this issue,please give me any advise.
Thanks and Best Regards,
Wilson
↧
↧
Error while activating /SCWM/BASICS
Hi,
I'm trying to acivate the BC Set /SCWM/BASICS in EWM 7 Add-On.
But everytime I'm getting an weird error that says "BC Set Processing error Message No: SCPR320".
When I check the activation log, I find that all the BC Sets have been passed to activation i.e. they have got a green dot by their side.
But on the left hand side BC Set browser, it says that the activation has been cancelled. I've also checked for key conflicts and there are none.
I've attached a screenshot of the activation log. Kindly help.
↧
EWM 9.1 - /SCWM/TU and /SCWM/VEH do not correctly display values
Dear all,
We recently switched to EWM 9.1. and have some trouble regarding the visibility of data:
Transaction /SCWM/TU and /SCWM/VEH do not correctly display values which are stored in the DataBase.
My first guess was that it has something to do with the TU status. That's why I also added a screenshot of that data-set.
TUs:
Only 2 TUs are shown in the list:
In the DB however several more TUs were stored which should be displayed in the list as well:
Status of TUs
Vehicles
I created 2 VEHs which should be shown in the list:
They are available in the DB though:
Monitor: Vehicles and TUS are linked according to the monitor:
Any idea what's the problem?
Thanks and regards
Gabriel
↧
PGR issue
Hi All,
I am trying to confirm the goods receipt for the inbound delievery where i am getting following error message.
Exception /SCWM/CX_CORE occurred (program: /SCWM/SAPLGMVT, include: /SCWM/LGMVTU02.
Please give your inputs.
↧
How to manage TU stock?
Dear Experts,
Understand that Currently Transportation Units are maintained as Transactional Data. However, we have requirement to manage the stock of Transportation Units.
Please throw some light on how can we represent the TU stocks in system.
If some one has already done that, kindly share your inputs.
Regards,
Shashidhar
↧
↧
Packing status becomes complete after using Pick HU
Hi Experts,
We use Pick HU for Outbound to pick products from warehouse to packing work center
but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center
the status of packing becomes complete
which should be ideally complete after we repack the products in to ship hu
is there any thing i m missing to accomplish this?
Regards,
Roopendra
↧
Error while creating distribution model
Please help.
Error while creating distribution model
Method BUS2015.SAVEREPLICA exists in model view WAREHOUSE
Message no. BDDISTMODEL051
Diagnosis
A method connection with a client and a server can only be defined in several model views, if the validity periods of the model views do not overlap.
The method BUS2015.SAVEREPLICA has already been defined for client ECC800 and server APO890 in model view WAREHOUSE, whose validity periods overlap.
Procedure
Change the validity periods and make sure they do not overlap. Then try to insert the method again.
Not able to undestand what is this procedure and how to check n change the validity periods.
↧
Not able to find Tcode /SCMB/SCUHIERMAIN
I am using EWM 7.0
I am not able to execute tcode /SCMB/SCUHIERMAIN When I checked in TSTC table, it shows the record but no program attached to this.
The link Creating a Supply Chain Unit Hierarchy (SAP Library - Integration of SAP ERP with SAP EWM as an AddOn) provides option only for SCM5 and SCM5.1
Can anybody tell whether this feature has been incorporated in EWM 7.0 in some other format?
↧
Auto Warehouse task from Delivery
Hi Experts,
Is there a way to call PPF action for creation of auto warehouse task for outbound delivery based on process type
we want the task to be created automatically only for certain process type.
I included process type in field catalogue of condition technique but its not working.
pls help.
Regards,
Roopendra
↧
↧
Manually create WT in "Waiting" Status.
Dear Experts,
Is there a way we can create some kind of "Planned" warehouse tasks like we have WTs created in "Waiting"?
We cannot use POSC for this. But we would like the Warehouse Tasks to be created in "Waiting" Status.
These are required for TUs. So, the idea is to convert all these "Waiting" tasks in to "Active" tasks upon TU Arrival.
Regards,
Shashidhar
↧
not scrollable columns in Warehouse management nodes.
Hello all. I need help.
I have custom node. I have to make 2 first columns not scrollable (horizontal scroll) and mark them blue.
I know only how make it not scrollable (function "Freeze to Column" and save it in layout), but I have to make it as in standard node.
How Can I do it ?
For example as 1 column on picture :
↧
Pack status misleading
Dear All
We have scenario of Pick, Pack Stage and Load where in loose items are picked to temporary reusable pick HU (Totes) and brought to Pack work center.
In the Packing station they are packed as per customer specific packaging , Finally staged and Loaded.
Issue is delivery gets the pack status "completed"immediately after the pick confirmation to Pick HU and not based on actual pack completion.
Is there any way to reflect the packing status after completion of packing in the work center.
I could have activated the flag " Do not put away HUs" in the Pack center storage type but we want to track the pick HU's adn the contents at the pack stations until they are transferred to packing cartons.
An extension to above question>>
Unlike the above scenario where the loose items are picked into the pick HU the scenario here is Picking of cartons to pick HU..
How to handle the requirement of Pick HU being with the resource after pick confirmation and the requirement is to just drop the picked cartons at the pack work center.
regards
Saravana
↧