Hello,
When i press GR button (/scwm/prdi) in EWM for inbound delivery Goods Reciept status changing from Not Started to Completed with no errors. But when i perform stock overview (mmbe) in ERP stock remain in status On-Order Stock.
Smq2 in ERP system contain no "delayed" queues.
So, could you please recommend some methods how can i trace posting transfer from EWM to ERP? Or what setting should i check to fix this problem?
Regards,
Alexey.
Hi Experts,
I am in abap and I got the requirement where I need to do the unpick of the picked quantity for an delivery item and after the unpick it should get updated back in delivery.Please suggest me by technical point of view. how can I meet this requirement?Please suggest.Thanks!!
Regards
Mrinal
While doing packing with RFUI menu I ended with error message as after providing input with work center ended with error message as "E: Select a valid work center". There is no error message number any clue?
Sastry
Hi Experts,
I have some questions regarding the configuration of outbound POSC if anyone can kindly throw some light.
Outbound POSC is determined by WOCR, I have done the following but still only one WT was created:
1. Configured storage control OUT1 with step(Pick, Pack, Stage, Load)
2. Assign the storage process to WOCR for the activity areas where each process step taken place.
Could anyone throw some light on what logic have I be missing? I supposed the above storage process will create 3 WT?
I really appreciate for the help.
Best,
Eddie
Hi,
I have configured the planned duration parameters for Warehouse task creation under path (EWM -> Cross process settings -> WT -> Define planned duration of movements in Warehouse), in order to determine the planned completion date/time according to the source storage type from which the stock is picked, when the Warehouse task is created.
But when I released the wave, warehouse tasks are not created with the planned completion date/time as mentioned under the above path stated. Instead the planned completion date/time is determined from the departure date/time from yard mentioned in the ODO.
Basically I want to calculate the time taken for the Warehouse order according to the summation of planned duration time of Warehouse tasks (as defined in the above path) associated with that Warehouse Order.
Could you please suggest..?
Regards,
Shravan
After distribution of the ERP inbound delivery to eWM system - goods receipt done with correction. Consider I am distributing quantity of 100 pcs from ERP to eWM system.
goods receipt correction was done for 20 pcs with process code I001.
Now the inbound delivery item quantity is updated with quantity as 80.
Corresponding ERP inbound delivery posting is failed. The quantity in inbound delivery line item is not updated with adjusted quantity.
the idoc which has triggered from eWM is carryoing the quantity of 100 pcs only.
Any idea how to correct the situation?
Regards
Sastry
IN POSC outbound process I have a query.
While creation of the warehouse task for the process step OB01 how the destination bin is determined?
Storage process : OUT1
Steps: OB01, OB02, OB03
regards,
Steve
During creation of warehouse task for picking system is not proposing source HU.
Storage type is maintained with Level of Avail. Qty as Highest-Level HU,
Control for HU picking is maintained as Propose Source HU as Destination HU.
Is there any additional settings needs to be maintained?
Regards
Sastry
Hi There,
I have created an Inbound Delivery in ECC and am using IDN & ID in EWM to do the complex put away. I am using IB01, IB02 & IB03 and have configured the setting for POSC using rule based for IB01 and IB02.
I am getting the following errors.
1. While configuring, I was not able to do 3065 (unloading with HU) for IB01. Instead I had used 3065 WPT
2. The IDN status is displayed in red color.
3. On creating ID, the ID number is generated, the status is again in red color (Locked).
4. WPT 1011 is being determined , but the staging area & the bin are not determined.
5. I am doing the packing in EWM, but the packed HUs are not visible when I am doing the follow up activities and creating a Ware house Task. The message is "There are no unpacked or packed warehouse request items for processing"
Kindly suggest what I need to do.
Thanks,
Vijay
Dear Experts,
I have a Batch Problem in EWM,
Step1. Transfer Material,Characteristic and Class to EWM-OK
Step2. Create Batch for Product in EWM - OK
I can't Display this batch characteristics in EWM,
Show the message Batch Valuation does not exist.
Please check the figures as below:
I can Change This Batch Characteristics in EWM,
and I key in Characteristic Value12 in EWM.
When I save this characteristic, it's still show's blank in EWM ,
But I can see the Value in ERP
The characteristics value disapper, after I click save button.
ERP system can show's value 12 that I Key in
I have check data integration in EWM and ERP,
Problem:
1. How can I display characteristics in the product for batch? How to solve the messageBatch Valuation does not exist in EWM
2. I can change characteristics value in the product for batch.After save the characteristic,it's show blank in EWM
But I can see the characteristics value in ERP.
Thanks for your help!
Howard
Hi Friends,
In our production system there is an Issue with outbound deliveries from ECC are not distirbuted to EWM within time. It take longer time to get replicated in EWM. For just one delivery /SCWM/OUTB_DLV_SAVEREPLICA takes up to 3 minutes in peak times to distribute the Outbound delivery from ECC to EWM.
Any help on this?
Thanks!
Hi,
While working with pack specification I encountered with one error in inbound process.
Process scenario is as followed.
The each of product is packed into a packaging material which creates a HU(small box).
subsequently each 10 PCS of above HU's are packed into another HU(Pallet).
packaging specification is maintained with two levels.
ERP system I have created inbound delivery of 12 quantity and distributed to eWM system.
in eWM system according to packaging specification system has generated two HU's.
first top HU - 1000 contains ten low level HU's and second top HU 1001 contains two low level HU's.(worked as expected)
after confirmation of unloading task goods are available at staging area and new 2 tasks are generated.
source is staging area and destination is final bin.
Here system has created two new HU's for two tasks. ( do not know why this was happened?). Ideally the source and destination HU should be 1000 and 1001 for individual task.
when I check any one of the new HU system is taking to me HU details screen and I can see that
top HU is 1001 and low level HU's are new Handling Units.
when I tried to confirm the final putaway task system is throwing error as HU xxxxxxxxxx has a reserved quantity; HU withdrawl not possible
and from monitor when I click on HU details I have my own HU's 1000 and 1001. 1000 HU is with 10 low level HU's and 1001 is
with two low level HU's.
thanks for your time and valuable inputs..
Hi All,
In the pack by work center report (MON->Outbound->Process->WIP->PACKING by Work Center) I need to add a new field 'Available to Pack'. This field will have the quantity which is packed and is in Inbound packing station, ready to get packed. The standard report fetches only those records (from /SCWM/WRKL table) which are not fully picked. But I need to also display the pack centers for which the WTs are completely picked.
For eg: if in a wave there are 3 ODOs and totally there are 6 items, out of those 5 times should go to pack center PA10 and 1 item to PA40. If I pick all the 5 items that should go to PA10 then the report is not showing record for items in PA10, it only shows the item in PA40. The requirement is I also need to show the items for the wave in PA10 so that I can display how many are available to pack in PA10.
How to do this? Please help.
Thank you!
Best Regards,
Sriram.
Hi,
while working with outbound process I am facing the problem.
Inbound process is completed with packaging specification process. each product is packed in packaging material(HU is generated).
I have created with PO with 5 quantity and subsequently inbound delivery got created for 5 pcs and distributed to eWM process.
According to packaging specification total 5 HU's are generated.
product is placed into one storage bin with 5 HU details.
When I create sales order for the product each line item quantity as 1, subsequently delivery got created with 5 line items and distributed to eWM system.
in eWM system there are 5 tasks are generated and system proposed for each task one Handling Unit. Subsequently I could able to complete the process of picking confirmation , packing , staging , loading the HU's into TU. completion of TU.
When I create a sales order with 4 quantity , a delivery has been created with 4 quantity and distributed to eWM system.
When I tried to create task for the ODO system has proposed only one task with 4 quantity.
I have the option of providing only one source HU in this stage.(in fact source HU is proposed by system only).
When I tried to proceed with confirmation system is proposing the error quantity is not available ( True - HU contains only one piece).
any clue how to overcome the situation?
thanks in advance for your help..
I have very basic question. need a detailed clarity.
When I am checking the document for ware house structure (from best business practices) I noticed rack storage for small parts.
Bin characteristics says 1 europallet per bin. Storage type characteristics says HU is not allowed.
If HU is not allowed for the storage type - how a pallet is placed in the storage bin?
to me both are contradictory statements. can any one throw some idea..
your help is very much appreciated.
Dear All
In RF picking ( System guided mode) , Product task is confirmed from the source to Resource 1 and the Handling Unit is with Resource 1.
Resource 1 couldn't complete the task , hence he triggers F7 and leaves the remaining work to the common pool by confirming YES in the pop-up.
Now the supervisor wants to assign the open HU task to Resource 2 for completion. Open task still displays Resource 1 in the source information and when Resource 2 tries to execute, an error message appears (E Content of WT xxx is located on resource " Resource 1").
Expectation is if he confirms the pending task to common pool then it shall be executed by any other resource.
Thanks in advance
regards
Saravana
Pack spec for the product is maintained as below.
20 pcs of product is packed into Cartoon and 1 pallet is holding 5 Cartoons. Sales order unit of measure is Cartoon and purchase order unit of measure is pallet.
I have created purchase order and subsequently delivery. This delivery is distributed to eWM system. According to the pack spec 1 TOP HU( pallet) and there are 5 low level HU(cartoons) got generated.
According to the putaway strategy one storage bin holds the TOP HU and corresponding low level HU's.
from inbound point of view is working as per expectation.
I have created a sales order for 2 Cartoons and subsequently a delivery got created and distributed to eWM system. ( requested quantity is Cartoon).
when I created the task for picking process system has proposed source bin and source HU as the TOP HU.
When I tried to create+save the warehouse task system system is referring to provide low level HU and pick HU details ( correct).
Here I am creating a dummy HU ( and trying to pick both 2 lower level HU) into pick HU.
After creation of ware house task when I check the pick HU details there are no low level HU's. ( I am expecting the pick HU should contain two low level HU's.).
When I create two HU's manually and at that instance system is allowing to move the pick HU''s into new HU's.
Is it the case we are using Pick HU is only used for picking purpose without HU details and move the quantity to work center and there we need to pack the goods ?
am I missing any configuration settings including pick HU logic
?
thanks for your help..
Hello Experts
When I was creating the Product in EWM (/n/scwm/mat1 ) system is not showing the Party Entitle to Dispose in Drill down .
I have Checked the tables /SAPAPO/LOC and /SAPAPO/LOCMAP and found that - Three are two entries for my plant with two Locations like PLCBLR and SUCBLR.
I believe the above this the issue in not showing the plant while creating the product master . Could any one tell me why it is showing twice ?? and Why not it is showing the same for my plant while creating the product master ? Am I missing any Configuration assignments ?
Thanks and Regards
Pavan G Kulkarni
Dear All ,
I am trying to execute process oriented storage control steps . kindly refer below screen shots of steps followed.
As below my storage process has 3 steps , Unload - IB01 , Deconsolidate- IB02 , Putaway- IB03 .
My requirement is to complete 3 steps in sequence thereby confirming final inventory to storage bin.
First step IB01 "unload" in storage process worked correctly as below .
When creating task to move HU i am getting error.
I have defined consolidation group as below .
My Query's are as below.
1. Why system is directing inventory to destination bin as it should be executing storage process step2: IB02 and inventory should have been directing to deconsolidation work center.
2. I have defined consolidation group but error persists.
Kindly guide me on error , please let me know if you need any further information.
Thanks
Jinoy
Hi Experts,
When i am trying to create a Warehouse Task with an inbound delivery, the system is throwing an error as this.
I maintained necessary strategies.
When we see the error, system is able to determine my storage type, but some where i am missing the master data.
I have maintained the HU type in product master data.
Kindly help.
