Quantcast
Channel: SCN : Unanswered Discussions - SAP Extended Warehouse Management (SAP EWM)
Viewing all 1810 articles
Browse latest View live

Outbound Delivery not created for production order in ECC after material staging - eWM integration

$
0
0

Hi ,

 

Please note I get the below error when I perform material staging for production order and am unable to create an outbound delivery which would get distributed to eWM.

 

Data for plant #### incompletely maintained

Message no. /SPE/MAN007

Diagnosis

For production supply deliveries to be created in plant EWMP, various data has to be maintained in the supplying and the receiving plant:

  • Shipping point
  • Sales organization
  • Distribution channel (only in the supplying plant)
  • Division (only in the supplying plant)
  • Customer (only in the supplying plant)
  • Vendor (only in the receiving plant)

System Response

Because of the missing data it is not possible to create a delivery.

Procedure

Maintain the missing data in Customizing for plant ####.

 

I have gone through the below threads where members had reported similar issue and I have tried maintaining the entries in customization as suggested but am still getting the error message :

 

EWM - PP interface - outbound not creating in ECC

 

I have maintained the below :

 

1. In customizing for SAP ERP choose Logistics Execution  Decentralized WMS Integration  Central Processing  Application  Define Interface to Inventory Management and Delivery-Relevant Data

2. Choose the activity Delivery Relevant Data for Warehouse Number

3. Create the following entry for your ERP warehouse number

 

In addition to the above configuration I have also assigned the vendor in the customer master in XD02

 

Delivery for EWM not created when Production Or... | SCN

 

In the production scheduling profile I have maintained the requirement '2'. Transfer requirement, transfer order and delivery on release.

 

The shipping point determination is also in place, the correct loading groups have also been maintained in the material master.

 

Any leads to from members who faced this issue and were able to resolve the same would be highly appreciated.

 

Best Regards

Naren Prabhu


EWM Integrated with IS-Automotive ?

$
0
0

Doe's anyone some experience of Integration EWM with IS-Automotive ?

 

Especially with EWM and IS-A-VMS (Vehicle Management System) ?

 

Do you think is that a certified integrated scenario by SAP ?

 

Thanks a lot for your time.

 

Have a nice day.

 

Bruno Bartoletti (EWM Solution Architech)

Want to skip source screens in put away_LM03

$
0
0

Dear All,

 

I want to skip source bin data screens(screen no 1202) in put away.We created verification profile and assigned it to goods movement 101 for receiving.I even checked the skip source data field.It still issues the source screen in LM03.Kindly expecting your valuable suggestion.

EWM process with ECC

$
0
0

Hi,

I am new in EWM and currently we are working on ECC-TM-EWM landscape where TM and EWM is not directly connected.Now I have some question on the data transfer between EWM-ECC and would require the experts to comment :

 

a) Can you let us know in which business object and field we can capture container ID in EWM since we would like to transfer this info to ECC

 

b) If we have a field for container No can we capture container No in HU and we would like to have the technical details of the same

 

c) Finally is the HU No along with container ID transferred back from EWM to ECC and if yes in which business object it gets updated i.e delivery or shipment.

If you have some screenshot on the same will appreciate a lot

Distrubutive Putaway in SAP eWM

$
0
0

Hi All,

 

Please can any body provide configuration and business scenario for WOCR distributive put away in eWM

 

Thank you in Advance.

 

Cheers,

Order Replenishment

$
0
0

Hi experts,

 

I want to understand how the Standard Order  related replenishment works.

 

Say i created Outbound delivery with 100 pcs of material but in warehouse there is only 50 pcs available.

 

In such scenario how the order related replenishment will get completed ?

 

Regards

Ramsy

TU creation in EWM

$
0
0

Hi,

For TU creation in EWM, do we need to have HU assigned to shipments in ECC?

Secondly if HU can be transferred from FO to shipments will it  creates TU in EWM automatically.

Movement Type's in EWM

$
0
0

Hi EWM Guru's,

 

We need your advice asap on the following:

Due to recent migration , cutover and archiving and also hard ware issue's.
our SCM system have lot of stock difference's in between ECC and SCM.

We have performed inventory sync in between ECC and SCM to match the stock difference's in between both system's. But we have performed this activity many time's.

Now finance team is having issue's with inventory sync as account;s are affected.

So they requested a seperate movement type to use when ever we sync the stock with /SCWM/ERP_STOCKCHECK . now whenever we sync they will get 711 and 712.

But finance team need a seperate movement type 9** to do the inventory sync whenever we see a huge difference of stock's in between ecc and scm.

Please advice this can be achieved from configuration or we have to do custom development.




Thanks

Vy


Page format for Pallet Label - BAR Code SSCC

$
0
0

Hi Experts,

 

i have a requirement to create pallet label on smartform.

 

my requirement is a 4 by 6 inches label to be printed for pallet . Please let me know if i have to specify a page format (other than default  DINA4).

 

Please share any information on this. Even the configuration to set up the pallet label smartform (HULabel).

 

Barcode: SSCC

 

REgards,

Tashi

Quality Inspection :Target stock attributes do not match the target default values

$
0
0

Hi ,

 

Currently working on quality inspection process .

 

I have done all the necessary configuration but I am facing with the below error .

 

1.Generated the objects

2.Assigned to warehouse independent inspection object type

3.Crated the indexes

4.activated the sample type

5.activated the item type

6.activated the decision codes

7.Maintain the follow up action

 

But still I am getting the below error when I am rejecting the HU with UD Reject in the work center.

 

Not sure what is the setting I am missing .

 

Please Help

Warehouse Request Open Quantity Issue.

$
0
0

Hi Experts,

 

We are facing a typical issue due to system document flow inconsistency during cancellation of Warehouse Task for an ODO Item.

 

We are working on EWM9.2 with SP:002

 

Scenario:

 

My ODO#1  Quantity is 100

 

Step1: Create the warehouse task for full Qty/ partial qty of the ODO Item. System successfully generate the warehouse tasks.

Step2: Cancel Warehouse Tasks.

 

On cancellation of Warehouse Task, I should able to generate the task again right.

 

Neither we could able to new Create Warehouse Tasks or not able to Adjust the Quantities to Zero for delivery closing.

 

But due to the system inconsistency the Document Flow of the ODO item is not updated for DocCat: TOR(Cancel Warehouse Task).

 

How do we correct this document flow inconsistency. Is there any SAP Note available.

 

Kindly let me know please.

 

Thanks & Regards

 

Ramesh.R

Stock stuck in 1Q

$
0
0

All,

 

I have a problem in a PRD system.

 

An inspection type 17 was used for incoming inspection. The Inspection Plan uses a fixed sample size of 1.  The inspection lot was created in ECC. The results recording and Usage Decision was done in ECC. The corresponding inspection document was updated with the UD code ACC with follow up action putaway. The stock is stuck in status 1Q despite the fact that the usage decision was done. This is happening for one out of the 10 HU's on the inbound delivery.

 

Question:

 

1. How do i move the stock from 1Q to 1F? The transaction code /SCWM/POST will not allow me to do this giving an error message that the stock is stuck in quality inspection

 

2. Has anyone seen this behavior in EWM-QIE?

 

I have also raised an OSS note with SAP. This incident has gone to the development team in Germany.

 

Thank you for your inputs if any in advance

 

Regards

 

Anup

Sample drawing procedure in EWM

$
0
0

Hello Folks,

 

I am working on mapping sample drawing procedure in EWM system. Have been looking for guidance online for a while. Can someone help me with step by step guidance on how this can be achieved.

 

On configuration side-

How are Item types and finding types mapped from ECC to EWM ?

How are dynamic modification rules linked to these?

Any other important mapping that needs to be in place ?

 

On Master Data Side-

What and how it needs to be maintained?

I am not a QM expert so detailed help would be really appreciated.

 

Regards,

Khushboo

Queue determination not correct for a storage section generic WT

$
0
0

Hello Folks,

 

I would like to briefly describe the issue here-

1) We have a storage process where Picking,Packing and Staging are steps.Packing step does not have a destination storage bin assigned and when WT gets created it gets created only with Storage Type and Section for destination.

2)When first WT to pick from Source to destination is created,system is trying to find a queue from source AA to destination AA as GI Staging zone.This is not expected.It should look for queue from source AA to destination AA as packing st type and not GI staging AA.

3) It is observed that system is trying to look for destination AA as GI-Zone whenever WT is storage section generic.

 

This works absolutely fine if we have assigend a destination bin in packing step of storage process but not without it.This also gives indication that all queue detrmination access seq and AA related settings are good and its the generic WT ,that is making a difference.Please explain the reason for such system behaviour.

 

 

 

 

This issue is on high priority for me.Quick help would be really appreciated.

 

Regards,

Khushboo

quants creation in bulk storage type in sap wm

$
0
0

hii,

      my doubt is , in bulk storage type for every SUT ,is there create separate quant number generate or not


EWM 9.2 is compatible with which version of ECC

$
0
0

Hello,

 

I would like to know EWM 9.2 goes with which version of ECC/ERP.

also, this version compatibility is different with different EWM Deployment options?

BADI - Create my owner Removal Stretegy in EWM

$
0
0

Please I would like to know if there is some BADI in EWM where I can create my owner logic for selecting the BINs .

 

 

 

I saw there are a lot the BADI but , I did not get  identify any BADI where I can search the stock BIN to determine by myself.

 

 

 

I would like to select the data from table / SCWM / AQUA and apply my logic and decides what BIN I want to  assign for creating the tasks .

 

 

 

May you help me ?

 

 

 

Regards

 

 

 

Alan Mattos

Using this FM /SCWM/TO_CREATE_WHR

$
0
0

HI all,

 

I am using this FM /SCWM/TO_CREATE_WHR to cerate warehouse tasks.

 

My requirement is i need to create a single WHO for all the tasks (meaning which I am creating one WHO for all the tasks ). This is I am able to achieve my commenting the parameter single_to in the FM.

 

But I have an issue.

 

For a full pallet HU (36 Cartons) I am not able to create 36 tasks for 1 WHO . If I have 35 cartons  then I am able to create 35 tasks for 1 WHO order.

 

In simple words I am supposed to create single tasks under one WHO even for a full pallet HU.

 

Can anyone help me in doing this.

 

 

Thanks in advance.

EGR document doesn't get creating

$
0
0

Hi ,

 

I have created process order, for this order i want to do Good receipt, So as per the same need to create EGR document EWM(ERP) by using transaction /SPE/EGR and.

 

Enter the following data:

 Warehouse Number:

 Select Update Expected Goods Receipt

 Deselect Test Run

 Enter a time range that includes your scheduled finished date of your process order

 Deselect Activate PO/SA Selection

 Select Activate PP Selection

 Select Include By-Products

 Order: <process order number> Enter order number

 

 

After execute, It doesn't throw an error and also EGR doesn't get create. Please help me to solved this issue.



Thanks In Advance...:)

Not able to add Serial Number in /SCWM/PRDO

$
0
0

Hello Experts

   I have a outbound delivery for a product that is serialized in ECC & eWM.

I am trying to add Serial Number under Serial Number tab and I am getting following message.

I have checked product is serialized and in outbound delivery field Serial No. Reqm = C. 

 

 

Serial numbers cannot be changed

Message no. /SCWM/DLV_SERIAL303

 

 

 

Thanks

Ankit

Viewing all 1810 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>