Hi Experts
I have done settings for EWM with connection to ERP IDES.
I could able to distribute the inbound delivery but getting error in transferring to EWM.
Suspecting Idoc issue and partner profile.
Please see attached screen shots and advise if any setting to be corrected.
Thanks
ramSiva
Hi All,
We are updating the decision for an inspection document from /SCWM/QINSP and saving it. On checking in /SCWM/QIDPR, only the element is updated with the correct decision , whereas the header is not updated correctly. Since I am an ABAPer, I am looking for any BADIs that may have been implemented and the functional consultant is looking from his perspective, but we have not been able to arrive at a solution. Kindly provide your valuable inputs.
Regards,
Shankarnarayan.K.
can we use serial number only in EWM side with no settings on ERP side or ERP is no at all involved in it ??? Can anyone suggest the customizing steps??
St.Type: Bulk Behavior. Maintained all put away relevant config (St.Type Search Sequence, WPT, Bulk Structure, Bulk Indicator at Whse Product Master). Created manually three storage bins specifying Storage Type, Storage Section, Storage Bin Type.
Received stock via Inbound Delivery, during creation of HU WT, the system throws an error
No values found for the selection
Could not fully determine the destination data.
The system is not proposing the newly created bins. Thanks in advance
Hi Experts,
I have a requirement to create kit to stock for ex: 4 EA, for which I need to pick two parts X and Y with 4 EAs. When i create VAS order from EWM,
ODO is always creating for 1 EA ie. respective WT is always getting created for 1 EA, but it should create for 4 EA as there is more quantity in source bin. And, WOCR rule is also not created with any additional rules like packing profile and limit values and other rules.
But, if i try to pick the same kit component with direct outbound delivery, it is picking quantity as expected with different WOCR.
Can you please suggest me what could be the reason for this issue.
Thank you...
Sridhar B
Hi Experts,
My client is looking for RFID implementation with EWM. Can you please help to understand below queries? Thanks in advance.
What technology has to be integrated into system to support RFID?
What brand of RFID equipments available to support?
How to accommodate RFID brands/frequencies/types that are not already integrated?
What different types of RFID tags can be used with system?
What programming or custom code is required to accommodate RFID?
Demonstrate RFID capabilities?
What criteria are used when selecting and providing RFID equipment?
How does the system accommodate changes in RFID tag data, such as data elements, structures and identifiers?
Can the same operations be performed by RFID that are already being performed with bar codes?
What additional modifications are needed to 'swap' bar code input to RFID input?
Can the RFID equipment be used in both hand-held and fixed applications?
Thanks...
Sridhar
Dear Experts,
No action carried when trying to pull or push PO to EWM. I tried ran the report in ERP and EWM; both has no result.
Kindly help with the prerequisites for sending the POs to EWM.
Regards,
Azam Syed.
Hi All .
Can you please tell me how to extract details of available stock , incoming stock and outgoing stock from tables in EWM. I could find out /SCWM/AQUA (for available Qty) , /SCWM/QUAN (Quant Attributes) and /LIME/NQUAN (Stock Qtys) but not sure how to link them through GUID to get the stock figures like they appears in /Mon -> Stock overview report.
Thanks in advance for your help...
Regards
Sandeep
Hi EWM Gurus
I have created an Inbound Delivery in ECC and the same has been transferred to EWM.
However, the Blocked status indicator shows Red indication instead of Green.
This is my first Inbound delivery that has been created. I am unsure as to what is missing.
When I click on the "Validation" icon, I get the details.
Item was saved inconsistently. Msg Class: /SCDL/BO, Msg No. 46.
Kindly help me with this.
Regards
Sudhi
(I wanted to post this message in WM forum, but my search kept on returning EWM forum, so posting my question here)
Hello Friends,
We use Txn: LX26 to generate WM cycle count documents. Now our plants want that these documents be created using a batch job (the documents should be just created - not printed, and not activated). Thereafter, they will use LX22 to review those document and decide when/what to count.
I created batch job using the program in LX26 (RLINV050) along with its variants - however, that batch job just creates a log of proposal, and does not save/generate the document. Txn: LX26 takes 3 actions - viz. execute LX26 to create proposal, select all those proposals, and <save> - and I don't know how to replicate those 3 actions in a batch job.
Can someone help me in defining batch job for generating (but not activating) WM cycle count document based on LX26 logic please.
Thanks,
- Chetan
Hi,
Which field in the wave template can be mapped to delivery date of the outbound document.
Karthik
Hi Gurus,
Is it possible to assign the two delivery line items of an Inbound delivery to two different TU's ?
and How do we change the assignment hierarchy ?
Hello Experts,
During inbound Process, While confirming the Warehouse Task i am facing an Error: HU 2357 has a negative available quantity. Message no. /SCWM/L3684
Please help me out to resolve this issue. Thank you
Regards,
Raj
Dear experts,
I have following situation:
two warehouses: first one will be managed by EWM 9.2 the second one will not be managed by any WHS.
Question: when there one HU being used in warehouse with 9.2 (physically and in the system).... and after some time this HU will be taken out from the warehouse (with EWM 9.2) and used in other warehouse. Is it possible to delete this HU from the EWM System but to keep the history of it (history of warehouse tasks etc... ) ?
Thank you very much
BR
Denis
Dear Experts,
Currently I'm struggling a bit with the question from the EWM 9.2 area...
As I know and as far I understood the production material request (PMR) and expected goods receipt (EGR) will be created in EWM directly after one Production Order in SAP ERP has been released....
The question: Is it possible to change the creation moment of those two object in EWM? For example it is to early for me and I woud like not to create these objects in EWM even one Production Order has been released?
Thank you very much in advance.
BR
Denis
hello Members,
To my surprise, I don't see the CHBA exception available in my EWM system. I am on an EWM 910 system, SP level 3 (however that I guess should not matter too much).
The CHBA exception is not available in the customizing. All other exceptions seem to be available.
However, when I checked another system (same version but in a totally different landscape), the same is available.
Any clues on what could be reason for this?
regards,
Priyank
Experts,
Am trying to create VAS Order for inbound process in WM. All configurations are done. Maintained master data for template determination as well. But when I post GR, TO is getting created to normal bins. No VAS Order is being created. Not sure what the issue is.
Configuration:
1 Activated VAS for Warehouse
2 Maintained VAS Work Centers, Defined Number Ranges
3 Maintained VAS Template determination
4 Maintained condition records for VAS Template determination
Still not creating VAS TO for inbound.
Any Inputs?
Thanks in advance
Surya
Hello SCN,
I'm currently in the process of designing and planning a major upgrade to our warehouse infrastructure and management system. We are currently running an SAP WM module (for warehouse management duties), in conjunction with an SAP IM module (for consumption and tracking of the goods, once delivered from the warehouse).
The upgrade of our current system will see the introduction of both barcoding and RFID technologies. One requirement of the proposed system will be to confirm the delivery (time and location) of a given pallet/container/good. In our current environment, the lack of standard integration between our WM and IM environments has made this almost impossible, without considerable customisation.
My question is this: with an SAP EWM platform, can the confirmation of a successful warehouse delivery be extended to the point of delivery, as opposed to the point of despatch from the warehouse?
Any clarification here would be much appreciated.
Many thanks,
Jamie
Hi Experts,
I did CIF of vendor to EWM system to create business partner and found that the Inbound queue in EWM system is in error for this vendor. It is giving error in German mentioning Geschäftspartner 1500002036: keine Anlage mit dies er externen Nummer moeg.
Please let us know if any one has faced this issue and solution to this.
Thanks & Regards,
Prashant
Hello everyone.
My platform is SCM 7.03. I'm working on EWM RDS 9.1 and one of the IMG related configuration item is to "Define Unit of Measure Attributes".
SCM Extended Warehouse Management → Extended Warehouse Management → Master Data → Product → Define Unit of Measure Attributes
Warehouse Number | Unit | Qty Class. | Stock-Specific UOM |
YER2 | CAR | C | [X] |
YER2 | PAL | P | [ ] |
But it seems to be the menu path is not exist in the IMG, or the document has missing information.
I'm not sure if I have to activate a business function and that is the one missing.
Does anyone have any suggestion please?
Thanks,
Ayhan