Hi Experts,
If we make direct pick for short pick quantity for product with multiple bins, system is creating two WTs successfully.
i.e. one for actual quantity and second WT for remaining quantity.
But, when we make above process using wave process, system is not creating automatic WT for remaining quantity.
Could you please help me on this issue? Little urgent to me.
Thank you in advance.
Hi All
Inspection document created in EWM is not able to create inspection lot in ECC. In the inspection document, it is identifiying external system and its business system properly. But seems to be communication is not happening properly. what should I check?
Thanks
Sasidhar Gupta
Hi
I knew that SAP supports standard IDoc communication via XI for creation of TU in EWM. Is it possible to change this to qRFC communication?
Thanks
Sasidhar Gupta
Hi All,
For some reason PPF action is not scheduled. I have kept the break point in Schedule condition BADI IF_EX_EVAL_SCHEDCOND_PPF~EVALUATE_SCHEDULE_CONDITION but its not stopping at debugging mode when i save Outbound delivery order.
Turned Update and system debugging ON . I can use SLG1 for PPF logs ,but it does not say why action failed to Schedule .
Thanks,
Srini
Hello,
we are currently facing an issue that we have two goods which are exactly the same, apart from one component. These are marked as item number X and Y
We want to integrate this into our system with one item numer Z with the option for the puchaser to choose which of the Z item they like.
For example, this is the setup we are looking for;
Customer has two item numbers X and Y. This is inserted as a purchase request, we then want the SAP System to assign this as item Z (component Y) or Z (component X).
We want to have this setup so we have to maintain one item record while still keeping two items which are slightly different in the component setup. We are trying to avoid keeping two item numbers in stock
Is there a way to have this setup?
Thanks in advance!
Hi Experts,
I have issue in creating WT automatically with wave during short pick for remaining quantity.
In wave template there are three values in drop down list i.e. under the column Behave during pick denial (P).
Three values: Leave item in wave, Remove item in wave and Create WT with alternative source bin immediately.
I am confusing here to use above values for short pick. Can you please explain me to get it clarified which one i can use?
Anything else configuration i have to make sure to work for short pick with wave processing.
Thank you in advance.
Sridhar
Hi Experts,
I need some help, I´ve to cancel all SCU´s, locations and maybe even the BP. I failed to activate the user Exits
ZXCIFUSERU08 for material data
ZXCIFUSERU06 for location data
and now have no prefix on my SCU´s. This make problems because my shipping point and plant have the same ID.
I tried the jobs for deleting, the run but nothing is cancelled.. Also I´ve got no Errors in SLG1.
Thanks for your help.
Kind regards
Dieter
Hi Experts,
please explain the the SAP EWM outbound and Inbound process with t-codes.
Regards,
Ram
Hello Members,
I am planning to learn SAP EWM. (course not yet started)
Technically:
What to focus on?
What things to do?
How to become a strong EWM consultant (with time)?
How to equip myself for the job market?
Thanks!
TW
Hi All
I have maintained below configurations but system is not able to determine door & staging bay automatically.
1. Storage types, storage sections and bins for door, staging area
2. Staging area/door determination group
3. defined warehouse doors
4. assignment of SA/D det.grp & staging areas to door
5. /SCWM/DOOR_SCU - Assign Door Storage Bin and Supply Chain Unit
6. /SCWM/STADET_IN - Staging Area and Door Determination (Inbound)
7. /SCWM/GMBIN_DET - Maintain Goods Movement Bin Determination
Please suggest what I missed.
Thanks
Sasidhar Gupta
Dear Experts,
We try to create new field catalog but fail to do so. We know that we need to in customizing add new field, and then use the Badi /SCWM/EX_WAVE_PLAN to fill the field.
Could anyone please shine some light on this topic.
Any help is appreciate.
Best and Thanks,
Eddie
Hi Experts,
If the product is maintained in Warehouse data tab with storage types in order of X, Y and Z and in storage type tab storage types are maintained in order
of Y, X, Z. As per my knowledge if the system considers for putaway with Warehouse data tab, what is the use of storage type tab?
if i am wrong, how does systems works with those tabs and in which cases (Putaway and Replenishment and any others etc..)?
Can you please clarify me on this difference?
Thank you...
Sridhar
Hi Experts,
When we deconsolidate the ASN, some of the products getting into correct destination bin and some products are not getting into correct destination bin, getting into one inbound over flow storage type defined. When i looked at product master, strategies and storage types configuration the difference i see between actual storage types and overflow storage type is:
1. HU requirement option. i.e. for actual storage types - HU requirement not allowed and for Overflow storage type - HU requirement allowed but not requirement.
2. For actual storage type ---- Mixed storage selected as "several HUs with different Batches of the same product" for putaway rule: Addition to existing stock/empty bin and for Overflow storage type - Mixed storage without limitations
Can you please help me if anything is wrong with above selection at storage type level?
Thank you...
Sridahr
Message was edited by: SRIDHAR B
Hi Team,
Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
Advanced Thanks,
AN Reddy.
Hello Everyone
I need help regarding partially accepted scenario. For example out of 10 Cases/Item XYZ of qty 10, 4 are good and remaining 6 are not good. Business wants to accept only those 4 and return remaining 6. In this scenario, how do we configure the follow up actions? Do we get item/quantity wise updates form ECC? I have maintained quality score 50 against decision and assigned below PTWP action to it. Whenever that decision code was used in ECC, it is properly updating inspection document in EWM. But EWM, is making the 100% qty as Accepted with follow up action PTWP.
In the EWM system, I could not configure more than 1 follow up action for a decision code.
Thanks
Sasidhar Gupta
Hi Experts,
To make a finish product of hose i need to pick different components as per order. In that I need to pick a hose for example : 50 EA. If I see physically in storage type I can get 50 EA, greater than 50 EA and less than 50 EA but for example if 100 EA placed in bin earlier than other pieces.
When the user looks for picking 50EA of hose it is giving him 100 EA hose because of FIFO rule , then user to cut the hose and use only for 50 EA. But, we need to make efficient pick I mean system should have picked 50EA because it is available in bin.
Can you please suggest what is the best pick rule to make the efficient pick ? Using EWM 7.0 version.
Thank you in advance.
Dear Gurus,
I am doing rearrangement through t code /n/SCWM/REAR.
The value in "Total of Storage Position Evaluations" is appearing as 99999 irrespective of any value maintained in "Evaluate Whse Item" in customizing for storage type, storage section, bin type.
While creating warehouse task, system is determining the destination bin, but the "Evaluation of Optimum Warehouse Position" also appearing as 99999. Task is not getting creating created with below errors.
Could not find a bin in the optimum (Message no. /SCWM/UI_REAR011)
Warehouse order (product STER-02) not created; no improvement possible (Message no. /SCWM/UI_REAR009).
Note: Getting the same error for rearrangement with or without slotting.
Highly appreciate any pointer in the issue.
With Regards,
Malay
Dear Gurus,
I am doing rearrangement through t code /n/SCWM/REAR.
The value in "Total of Storage Position Evaluations" is appearing as 99999 irrespective of any value maintained in "Evaluate Whse Item" in customizing for storage type, storage section, bin type.
While creating warehouse task, system is determining the destination bin, but the "Evaluation of Optimum Warehouse Position" also appearing as 99999. Task is not getting creating created with below errors.
Could not find a bin in the optimum (Message no. /SCWM/UI_REAR011)
Warehouse order (product STER-02) not created; no improvement possible (Message no. /SCWM/UI_REAR009).
Note: Getting the same error for rearrangement with or without slotting.
Highly appreciate any pointer in the issue.
With Regards,
Malay
Hi all,
How can I get a report with all fields of the V_T3010 table?
Using SE16n only the fields MANDT, LGNUM, LGTYP are available.
Hi All
Could you please help me with required configurations in EWM to decode barcodes? In the warehouse we have several slips for putaway/picking/packing and warehouse resource will scan the barcode and confirms the task. Whenever he scans the scanner will provide the barcode data to the system but how the system will decode it and fills the form data. Please guide. Also I would like to know the different barcode technologies does it support.
Thanks
Sasidhar Gupta