Dear Experts,
We have a requirement of creating one WO for each ODO at the wave release.
example Wave 1 contains ODO1 and ODO 2. Both the ODO contains the same items, same WPT and picked from the same bins. so WOCR determined for both the ODOs are same.
Release Wave 1 system should create WO1 for ODO1 and WO2 for ODO2
Is it possible in standard.
Regards,
Malay
Hello all,
is it true, that further development for eWM will strictly reqire HANA? Means, without HANA-DB, no further developments for eWM from SAP? Thanks for info,
Kai
Hi All,
My requirement is whenever batch created/changed in ECC using any transaction , the same changes should reflect in EWM , i don't want to run batch CIF jobs more frequently for this.
Is it possible to do that?
Thanks,
Ganesan
Experts ,
I try to assign inbound delivery to existing TU
i am getting below Message
already i maintain BP with for the carrier
| BUP006 | Standard Carrier Alpha Code | LGOA |
i am not sure what i miss ..
Regards
Raj
Hi Experts,
I have created Outbound delivery at ECC side - got distributed EWM and got struck there with error Ässert condition is violated".
I have verified number ranges configuration at outbound node and looks everything ok to me. But, error is still existing.
Please suggest me what else i must take care to eliminate this error.
Thank ...
Srini
HI Gurus,
Good day to you.
Need your valuable advice on the scenario below.
We have been using IM for ages. We are implementing EWM for the first time. Below are the concerns
1. all this while we are using Mvt type 103 and 105 for GR purpose including for return 104, 106 and 124.
2. it is well sync with SRM module
After EWM
1. instead of 103 we will replacing VL31N for INB to sent the data to EWM
2. return will be in EWM
3. PGR will be through 101.
Concern
1. any chances for us to use 103 to create the same data as VL31N to flow to EWM
Thanks
hi expert,
i am new on EWM, this migt for stock removal strategy already configured and system runs well for long,
is very strange i meet an issue with logs below, seems no problem everything found but not the stock.
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence PIC1 and rule FIFO found
***** Product WT Creation *****
For warehouse request PDO 1549 10
For product 75111658; quantity 900,00000000000000 ST
***** Determine source data - start *****
Determining source data with storage type:, section:, bin:, HU:
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence PIC1 and rule FIFO found
Determine stock in source storage type PK01
System could not determine source storage bin
No warehouse task created
looking forward to your heart help. tks!
Dear all,
I am new to EWM. i am getting below error while activating distribution model for my warehouse.
could you please help me? I already using Distribution Model view as 'EWM'
Message no. BDDISTMODEL051
A method connection with a client and a server can only be defined in several model views, if the validity periods of the model views do not overlap.
The method BUS2015.SAVEREPLICA has already been defined for client ERPCLNT800 and server EWMCLNT400 in model view EWMCLNT400, whose validity periods overlap.
Change the validity periods and make sure they do not overlap. Then try to insert the method again.
Thanks and Regards,
Prabakaran Gurusamy
Hi,
I have done the GR in EWM system, but the same is not replicating in the ERP, when I have checked in the log it is showing the error message "RFC for GTS could not be determined.
But my question is. is GTS integrtation is required in EWM?
Also provide the solution for the same.
Regards,
venu
Hi,
My POSC process is UNLOAD > QIS > DCON > PTWY. A product is required to be packed as nested HU before putaway. I dont want this step in Unloading or QIS. How can this be achieved?
Thanks,
Karthik
Hi All,
I have scenario where we have 2 custom RF screen following up with standard picking screen.
Case 1 : 1 custom screen - Pick by production order
2 custom screen - list open WO against the production order ( user to select WO by his own)
3 standard pick screen : based on 2nd custom screen WO selection it should populate & navigate to standard pick screen ( pick by WO screens) and complete the WT with it .
Case 2: Once all WT within the WO completed it should navigate back to custom RF screens.
Is this possible in SAP EWM RF?
Please let me know your suggestions.
Hi
When i am doing CFM1 then system is working fine but when i am doing CFM2 then system is saying below comment :
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text : NO EXEC
Please suggest me some solution.
Thanks in Advance
Raj
Step 1. In MIGO we did good receipt with 103
Step 2. in Migo we release with 104
Step 3. Inbound created in ECC and replicated in EWM
Step 4. PGR confirmed in EWM but not updated in ECC
Step 5. Inbound in ECC still open.
How to close the inbound in ECC
Hello Friends,
I have one OBD which is showing pending status for GI while in vl03n it is showing confirmed.Please share your answers for the same and assist to get it resolve.
THANKS
regards,
Bharti
Hi,
I want to configure Distributive Putaway in SAP EWM 9.2.
I am working on scenario where different products are getting unloaded on one pallet in Goods Receipt area and Mixed HU (Pallet) is created. I want to perform Product Putaway from HU in Final Storage type. Putaway will happen for partially filled bins as well as empty bins (Partial bins will have priority than empty bins). Mixed product must not be kept in same bin.
I tried below configuration:
Kindly help to perform product putaway from mixed HU to final bins (Partial / Empty).
Experts,
Here is my issue ...
Created PO-IBD- ECC
Found IBD notification in EWM status is created and see in IBD notification
created TU - EWM
when i try to assign using /SCWM/GRPE I cannot able to find the IBD ..
what could be the reason for not appearing when i search for inbound delivery notification
Regards
Raj
Hello EWM Guru
kindly let me know how will i capture custom refrence document in SAP EWM (without SAP GTS system) after delvery distributed from ECC to EWM.
Regards
Akash Srivastava
Hi Experts,
I'm new to SAP EWM. Could you please help me with the query below.
Current scenario:
We are receiving the goods with POSC concept.
1. IB01 - Unloading - 3065
2. IB03 - Put away - 1011
So IB01 is assigned with Source storage type as 9030 and HU group as E- Pallet
Can I receive the goods only in cases with Process oriented storage control ? Is it possible ?
Kindly help me out.
Thanks and Regards,
Vijaya pranesh Balashanmugam
Step 1. In MIGO we did good receipt with 103
Step 2. in Migo we release with 104
Step 3. Inbound created in ECC and replicated in EWM
Step 4. PGR confirmed in EWM but not updated in ECC
Step 5. Inbound in ECC still open.
How to close the inbound in ECC
1. I have a case where once goods been arrive in Port I need to GR via MIGO using mvt type 103 (No issue okay)
2.This will trigger Idoc to forwarding company.(No issue okay)
3.Once the truck arrive in warehouse VL31N will be proceed with movt type 105(No Issue Okay)
4. The EWM can create WT and GR. The stock available as unrestricted stock which is available at storage bin level( no issue okay)
5. PGR status in EWM completed ( No issue Okay)
6. In ERP ECC the inbound is open and stock still at plant level. In ECC the Inbound has not PGR. This the issue.
Can any one advice how to map mvt type 105 to trigger the PGR from EWM to ECC.
Thanks
